7/8" Satin Full Color Logo Ribbon Tool Tips

UNCUT Ribbon Quantity:

5/8”, 7/8" and 1 1/2" uncut satin ribbon is delivered on a spool and your logo will be printed continuously on the ribbon.  Please note that the front side of the ribbon will feature the exact ribbon color that you select and your full color logo but the backside of the ribbon will be solid white.  Full color printing means we can print virtually any full color logo, photograph, pattern or full color artwork on ribbon as long as you have the rights from the corporation or artwork owner to have the image printed. 

PRECUT Ribbon Quantity:

5/8”, 7/8" and 1 1/2"precut satin ribbon is delivered cut into strips to a length that you will select below.  The ribbon is not heat sealed but if you select to have the ribbon cut with a pinking cut (saw-tooth cut) this type of cut significantly reduces the chance of fraying.

Precut Ribbon Length:

If you selected a precut ribbon quantity above select your desired ribbon length below.

Cut Type:

If you selected a precut ribbon quantity above select your cut type below.

https://cdn10.bigcommerce.com/s-3f0o6l0akn/product_images/uploaded_images/cut-type.jpg?t=1579188295&_ga=2.31909246.1922047754.1578684753-68355692.1578684753

Ribbon Colors: 

Our 5/8”, 7/8" and 1 1/2" ribbon is a single face satin, which means a shiny surface on one side. 

Custom Artwork/Logo:

Custom artwork or custom logo is any artwork that you will submit to have printed on the ribbon.  The cost of custom artwork or logo is for a limited time FREE.  If this is a repeat order using the same artwork or logo on the same width ribbon, please upload or email us the artwork so that we can easily match it again to your order.

Maximum custom artwork/logo sizes:

5/8” ribbon:  1/2” height X 20” length

7/8” ribbon:  3/4” height X 20” length

1 1/2” ribbon:  1 1/4” height X 20” length

If you are submitting more than one logo you can upload one logo below and email the other logo(s) to sales@ribbonwarehouse.com.  We prefer EPS files but can also accept a high resolution PDF, PSD, AI or JPEG (Minimum DPI of 300).

Resize Custom Artwork:

If you’re submitting Custom Artwork / Logo select below if we can proportionally resize your logo to fit properly on the ribbon.

Setup Instructions:

Please note in the below box any special spacing requirements or other setup instructions.  If no special spacing or setup requirements are noted your ribbon designer will setup the order as they see fit.